RESPA HVAC System on Excavator in Cement Clinker Plant- Could not be worse!

Another testimonial to the new HVAC RESPA Precleaner + Filtration + Pressuriser Technology provided by your LSM Technologies Team.

The Application is an Excavator working in a Cement Clinker Grinding Plant- one of the worst case scenarios of saturated atmospheres every experienced!

Problem: The setup of the HVAC Air- intake, Precleaner, Filtration Pressuriser System consisted of a single Radial Filter and Pressuriser assembly mounted on the roof of the cabin with a Dust Bowl Precleaner.

Some of the issues were:

• The Filter became continually blocked (at least three times a day), was blown out (a big no- no) each time it failed.
• The Filter Element was exchanged on a daily basis.
• Failure of the HVAC System caused three (3) Evaporators (and other components- see the state of the Condenser images) within  a period of 2000 hrs.
• High maintenance costs and and productivity loss were incurred.

Solution: The existing HVAC Precleaner  / Filtration System was replaced with a RESPA Precleaner + Filtration + Pressuriser.

To date the RESPA has operated for more than 300 hours with following results- so far:

• Filter has not been "blown out" nor replaced.
• There has not been any maintenance issues or of loss of productivity associated with the new RESPA / HVAC System.
• Pressurisation of the cabin has been maintained.
• Operator is very happy with the performance of the HVAC, reduction of dust and also overall comfort within the Cabin.
• Enormous costs and increase in PF (Protection Factor), for the Operator has been achieved.

Another success story for the RESPA HVAC Precleaner + Filtration + Pressuriser.

Please see the Video Clip below to view the severity of Operating Conditions, the performance and how RESPA can assist you. 

If you require further information. please contact us.